Product Comparisons

MODEL SERIES COMPARISON *

MODEL SERIES	A	X	C	P, HP
FULLY CONTAINED FLAME & COMBUSTION	√	√	√	√
DIGITAL TIMING AUTO SHUT DOWN	√	√	√	√
STEEL CHAMBERS 2800F REFRACTORY LINED	√	√	√	√
EXTERIOR SHELLS HI HEAT PAINTED	√	√	√	√
STAINLESS CHAMBERS OPTIONAL	√	√	√	√
GRATES IN BURN CHAMBER				√
AFTERBURNER MODEL SC2 (^ Opt on A models)	√^	√
AFTERBURNER MDLS SC4, SC8, SC30 & Larger			√	√
STEEL STACK REFRACTORY LINED			√	√
STAINLESS STACK UNLINED	√	√
STAINLESS STACK CAP	√	√	√	√
TEMPERATURE CONTROLLED WITH DISPLAY		√	√	√
OPTIONAL TEMPERATURE RECORDER		√	√	√
CODE COMPLIANT *	√	√	√	√
AVAILABLE IN 120/60 , or 220/50	√	√	√	√
GENERAL WASTES, FOOD, PAPER, BIO MASS	√	√	√	√
CONTRABAND , CANNABIS , MEDICAL	√	√	√	√
MASS OR PRIVATES ANIMAL CREMATION	√	√	√	√
AVAILABLE AS MOBILE UNIT	√	√	√	√
SMOKE AND ODOR CONTROL	√	√	√	√
STACK DATA AVAILABLE	√	√	√	√
DESIGNED FOR CUSTOMER ASSEMBLY	√	√	√	√

*CONSULT FACTORY FOR SPECIFIC PERMIT AND CODE NEEDS AND EXCEPTIONS

CONSULT THE FACTORY FOR SPECIFIC NEEDS AND EXCEPTIONS
Example: Highlighted values are if a C12 SC4 in 120 volt with LP gas were selected

MODEL SERIES	A	X	C	P
BURN CHAMBER CUBIC FEET (CF) (OTHER MODEL SIZES AVAILABLE IN SOME SERIES)	A200 = 6 CF A400 = 12 CF A600 = 19 CF A850 = 27 CF	X200 = 6 CF X400 = 12 CF X600 = 19 CF X850 = 27 CF	C6 = 6 CF C12 = 12 CF C19 = 19 CF C27 = 27 CF	P16 = 16 CF P25 = 25 CF P50 = 50 CF P77 = 77 CF P160 = 160 CF
BURN CHAMBER NOMINAL CAPACITY POUNDS (LB) ASSUME DENSITY OF 33 LBS/CU FT	A200 = 200 LB A400 = 400 LB A600 = 600 LB A850 = 850 LB	X200 = 200 LB X400 = 400 LB X600 = 600 LB X850 = 850 LB	C6 = 200 LB C12 = 400 LB C19 = 600 LB C27 = 850 LB	P16=528 LB P25 = 825 LB P50 = 1650 LB P77 = 2541 LB P160 = 3700 LB
MAIN CHAMBER TOTAL FIRING RATE BTU/HR Changes available to meet application	A200 = 275,000 A400 = 275,000 A600 = 530,000 A850 = 660,000	X200 = 275,000 X400 = 275,000 X600 = 530,000 X850 = 660,000	C6 = 275,000 C12 = 275,000 C19 = 530,000 C27 = 660,000	P16 = 275,000 P25 = 275,000 P50 = 640,000 P77 = 640,000 P160 = 1.5 MM
POWER OPTIONS VOLTS/HERTZ/AMPS	120/60/20 230/50/10	120/60/20 230/50/10	120/60/20 230/50/10	120/60/20 230/50/10
GAS PRESSURE LP/NG INCHES W.C.	11/7	11/7	11/7	11/7
DIESEL NOZZLES	factory set	factory set	factory set	factory set
AFTERBURNER MODEL OPTIONS
	Btu Range	Retention	Temperature	Modulating Fuel/Air
MODEL SC2	75,000	Up to 0.25 sec	1200 F	No
MODEL SC4	300,000 450,000	Up to 0.5 sec	1600 F	No
MODEL SC8	350,000 800,000	Up to 0.6 sec	1600 F	No
MODEL SC30	400,000 1,000,000	Up to 1 sec	1800 F	Yes
MODEL SC40 & larger	600,000 2,200,000	Up to 2 sec	1800 F	Yes

CONSULT FACTORY FOR SPECIFIC NEEDS AND EXCEPTIONS
Many other models are available beyond those shown

MODEL	L x W x H (Inches)	Height to Load (Inches)	Load Opening (Inches)	Approx. Wt (Pounds)
A200 (1 burner)	42 x 65 x 109	30	18 x 20	1500
A400 (1 burner)	57 x 71 x 135	30	22 x 29	2000
A600 (1 burner)	57 x 83 x 171	30.5	29 x 32	2800
A850 (1 burner)	64 x 83 x 180	36	27 x 19	3600
A200 SC2	42 x 65 x 147	30	18 x 20	1900
A400 SC2	57 x 71 x 192	30	22 x 29	2400
A600 SC2	57 x 83 x 192	30.5	29 x 32	3200
A850 SC2	64 x 83 x 201	36	27 x 19	4000
X200 SC2	42 x 65 x 147	30	18 x 20	2000
X400 SC2	57 x 71 x 186	30	22 x 29	2500
X600 SC2	57 x 83 x 189	30.5	29 x 32	3300
X850 SC2	64 x 83 x 192	36	27 x 19	4100
C6 SC4	42 x 65 x 212	30	18 x 20	2700
C12 SC4	57 x 71 x 210	30	22 x 29	3200
C19 SC4	57 x 83 x 212	30.5	29 x 32	4000
C27 SC4	64 x 83 x 192	36	27 x 19	4800
P16 SC4	48 x 78 x 234	44	24 x 28	5400
P16 SC8	48 x 78 x 260	44	24 x 28	6000
P16 SC30	48 x 78 x 300	44	24 x 28	8800
P25 SC8	48 x 90 x 254	45	24 x 28	8500
P25 SC30	56 x 90 x 300	45	24 x 28	9200
P50 SC8	54 x 156 x 192	36	30 x 79	10,000
P77 SC8	54 x 156 x 210	48	30 x 79	14,000
P160	55 x 280 x 266	88	42 x 109	32,000